EMotorad Electric Cycles - Square Cut, Tilakwadi, belagavi Electric Bikes and Electric Cycle Dealer in Tilakwadi, belagavi, karnataka

There is nothing like getting on your e-cycle and feeling the wind in your hair as you zoom through the open streets like there is nothing to stop you! 

It’s the power of two wheels pushing you forward and nothing else! 

However, even the most technologically advanced e-cycles can be halted by something as trivial as underinflated tyres. 

All that is needed to put your epic quest to a sad stop is gas—or rather, the absence of it.

Now, you may be thinking that any old pump will work just as well. If so, think again! 

Electric cycles are a whole different animal. They’re heavier, faster, and need a pump with extra pressure (literally!). 

The right pump selection ensures that the e-cycle performs optimally on long-distance or short city tours or other rough terrains. 

In this blog, we will provide a detailed guide on the available pumps and show you which one best suits your e-cycle so that you are always ride-ready!

Why You Need the Right Pump for Your Electric Cycle

Electric bicycles (like the ones from EMotorad) carry some extra weight owing to the motor and battery. This necessitates keeping your tyres well inflated at optimal pressure for improved performance and durability.

When an e-cycle has under-inflated tyres, it can lead to fast battery drainage, an uncomfortable ride, and an increased risk of a flat tyre. A good pump not only saves your tyre but also allows you to utilise your electric cycle fully.

Types of Electric Cycle Pumps – Which One Fits Your Ride?

It is definitely worth it to be aware of the e-cycle pumps available on the market and to choose the ones that best suit your needs.

There are three categories of most commonly used pumps, and we will discuss each based on riding behaviour and needs.

1. Foot Pumps – The Hands-Free Hero

Best for: Using at home and keeping a well-performing e-cycle and its tyres in perfect condition.

Foot pumps, such as the model EMotorad MiniAir Pump, are hands-free pumping solutions, which makes inflating a tyre much easier. With this, you won’t need to bend down or have sore hands due to prolonged use of manual pumps.

These pumps are slim but capable enough to get your electric bike tyres up to the highest PSI. Many of them also come with a gauge (EMotorad MiniAir definitely does) to help monitor and regulate the tyre pressure.

Why you should use it for your e-cycle:

Foot pumps suffice for using and maintaining e-bikes when refilling air into the tyres a few times before travel. They offer the right pressure values that do not interfere with the easily broken structures of the electric cycles. 

The EMotorad MiniAir Pump, for instance, has a foldable design with a wide, stable base that prevents it from toppling over while one is inflating. Its compact design also makes it easy to store.

Pump to Consider: 

The EMotorad MiniAir Pump is absolutely flawless for e-cycle owners. It does the work effectively with less labour. Its lightweight form and dual valve compatibility mean that it fits all e-cycles.

2. Mini Pumps – The Pocket-Sized Lifesaver

Best for: Travel, unforeseen circumstances, or quick inflations.

If a person loves long rides or adventure trails, a mini pump is one accessory they must carry in their backpack. 

Mini pumps are lightweight and require minimal storage, making them ideal for emergency situations when your tyre goes down in between rides. They may not perform as quickly as foot pumps, but they are handy and user-friendly, ideal for temporary repairs on the road.

Why you should use it for your e-cycle:

The electric cycles in some (or sometimes many) situations have to endure underinflated tyres like in the case of off-road as well as long-distance rides.

With the help of a mini pump, you can deal with unwanted decreases in air pressure in tyres without the need to carry a lot of equipment. That is the difference between finishing your trip and dragging your e-bike back home.

Pump to consider: 

The EMotorad MiniAir Jet is a truly functional mini hand pump for emergency use, intended for weary travellers. It is small and light in weight and has a single nozzle, so you can fill up your tyres while on the move.

3. Portable Pumps – The Balance Between Power and Portability

Best for: Cyclists seeking a small, lightweight pump without sacrificing too much power. 

This is because a portable pump, such as the EMotorad SmartAir Pump, is a multi-functional auto-inflating tool. It is heavier than a mini pump but can be easily carried even on long tours because of its compact design—it fits easily in the palm of your hand.

Portable pumps like the EMotorad smart pump include other features such as a power bank, LED light and SOS rescue with flash warning features.

Why you should use it for your e-cycle:

If cycling on a regular basis is your hobby or you have mixed terrain cycles – having a portable pump with extra power is crucial since it will conserve your time and effort.

These pumps are ideal for users who want something compact but can also cope with the higher PSIs that electric cycle tyres require.

Pump to consider: 

For power savings in combination with portability, the EMotorad SmartAir Pump is the perfect choice. It is compact enough to be stowed within a backpack (or even your pockets) and strapped to the bike frame while providing a great solution for keeping tyre pressure on a constant level even when mobile.

4. Floor Pumps – The Ideal Choice

Best for: Cyclists looking for a tough, yet user-friendly floor pump that will yield efficiency and portability alike.

Why you should use it for your e-cycle:

As an e-bike enthusiast or when you cycle on various terrains frequently, having a trusty floor pump comes in handy. It offers a little extra air pressure required to inflate the electric cycle tyres, saves you time and effort, and maintains optimal tyre pressure for smoother rides.

Floor pumps, such as the various models offered by EMotorad, are a bit larger than portable pumps but give you more air volume. They are still light and easy to carry. The trade-off seems to be better size versus power balance, so they are good for use at home and on longer cycling tours.

Floor pumps have integrated pressure gauges that ensure proper inflation. They can also contain many valve adapters, so you could use them for different types of tyres. This is more convenient for riders who prefer a more convenient pump to achieve higher PSIs that do not necessarily have to be extra big.

Pump to consider:

Some of the floor pumps in this list include EMotorad AirFlow, AirWave, and AirPlus pumps, which feature the best power and portability balance. Moreover, they come in compact sizes that can be stored at home or in your car. Their sturdy design ensures that you can easily inflate the tyres with minimal effort.

Because of the built-in pressure gauge and ease of compatibility with various valves, they are great for keeping e-cycle tyres perfectly inflated.

Valve Types – Schrader, Dunlop, or Presta: What’s the Difference?

It is very important to know what type of valve is suited for your e-cycle, especially when buying a pump. Among the many types of valves available on the market, the most commonly used ones are Schrader, Dunlop, and Presta. 

Let us analyse each of them and their differences:

Schrader Valve:

The Everyday Hero—Most e-bikes and cars come fitted with Schrader valves. This is because they are the easiest and most durable. They are less likely to get damaged because they have a wider diameter, making them perfect for commuter and city e-cycles.

Advantages: These valves are made of sturdy materials, making them durable and comfortable even when they are rough-used. They can fit most pump designs and withstand very high pressure without collapsing.

Disadvantages: Due to their width, a rim fitted with a Schrader valve will require a larger hole than a valve fitted with an endorsed Presta valve, which may compromise the rim's strength.

Presta Valve:

The Slim Speedster – Presta valves are found in motion with high-performance bicycles or road races since they are slimmer in width. They possess great strength-to-weight ratios, thus enabling them to provide superior air control, which makes them fit for use in bikes where every ounce counts, especially the performance ones.

Advantages: Presta valves allow the most pumped-in pressure, making them suitable for electric bicycles where the tyre performance has to be at its best.

Disadvantages: They are a tad daintier compared to the Schrader and need an attachment for some pumps. 

Dunlop Valve:

The Classic Choice—Commonly known as the ‘Woods valve,’ the Dunlop valve is rather rare nowadays owing to the fact that certain areas of the globe still embrace its usage. It is primarily restricted to old model bikes or those that do not prioritize performance.

Advantages: Inflating with Dunlop valves is a straightforward operation that requires no special attachments most of the time.

Disadvantages: They are plain but do not have the market support enjoyed by Schrader or Presta valves and majority of the contemporary bicycles have eliminated their usage.

Which one should you choose? 

When it comes to e-cycles, Schrade or Presta valves are welcome, as most electric cycle pumps, within EMotorad as well, offer these two types. So, before picking a pump, make sure that you know which valve type your electric cycle has.

Better still, the EMotorad Foot Pump, Mini Pump, and Floor Pump all feature at least dual-valve compatibility. 

You are, therefore, safe, regardless of what you choose!

PSI – Hitting the Sweet Spot

PSI refers to the air pressure within the tyres of a vehicle, measured in pounds per square inch. 

Electric Bicycle, getting proper PSI uses is not only for relaxation but also for safety and performance. Tyres not filled to the recommended pressure will make all the components feel heavy, increase rolling resistance, and work the e-cycle battery more.

On the contrary, overinflated tyres will make the experience more unpleasant. The ride will be bumpier and more uncomfortable, and it may even lead to a blowout, especially when riding on rough surfaces.

Most electric cycles, including bicycles from EMotorad, recommend a range of 50-75 PSIs depending on the type of tyre and riding conditions. However, this can change many things.

• Terrain: Smoother surfaces like city tarmac are suited for higher PSI almost closer to 70-75 to decrease rolling resistance and quicken the speed of the ride. On the other hand, using the e-bike on rough terrains or off-trails would be the opposite since a lower PSI of around 50-60 would be preferable for better tyre grip and cushioning instead.
• Rider Weight: Usually heavier riders would require a higher PSI to accommodate the additional weight and provide good performance to the tyres. Lightweight riders, on the other hand, do not have such restrictions in the recommended range so they can opt for lower PSI.
• Weather Conditions: In slippery or wet conditions, slightly reducing the PSI achieves better traction since the tyres can make wider contact with the ground. But don’t go too low because under-inflated tyres are still dangerous, no matter the weather.

In such cases, a pump fitted with a pressure gauge proves useful. It ensures that you are inflating the tyres to the ideal and exact PSI, considering riding habits and other influencing factors. 

Also, most EMotorad Pumps feature an integrated gauge, which easily increases and decreases the desired tyre pressure (PSI). Knowing that one has a definite gauge removes the problems of estimation, which is especially important for every e-biker, especially before one embarks on a ride.

It is important to note that routine inspection of your PSI is encouraged. It can be done before every long riding session or at least once every week to ensure proper tyre functioning.

Final Verdict – Which Pump Should You Use?

The electric cycle pump that you will eventually purchase depends on the frequency, the ways and places of riding. 

Here is a brief summary to help you with the selection process:

• For home use and regular tyre maintenance: We recommend you a good foot pump like EMotorad MiniAir Pump. The pump provides rapid and efficient inflation and eliminates the guess work in attaining the optimum tire pressure.
• 
  
• For portability and emergency fixes on the road: The EMotorad MiniAir Jet or EMotorad SmartAir Pump will do the magic. It’s light weight and easily portable whenever there is a need to use it. For instance, to correct sudden drop of tyre pressure.
• 
  
• For riders who want both power and portability: For people who want power and do not want to compromise much on portability either, the EMotorad AirFlow, AirWave, and AirPlus pumps come to the rescue. They strike a perfect compromise that allows for convenience and performance, which is very important for long journeys.

Conclusion: Keep the Pressure On!

Let's be honest, no one wants to travel in the middle of nowhere and find their vehicle having a flat tyre. That feels like the start of a perfect horror movie, but instead of the ghosts, the flat tyre is the scarier thing. 

It suggests an early end to an ideal ride. Luckily, though, with the right kind of pump, you do not have to worry about such a horror coming true.

Whether you are a one-weekend warrior, commuting every day or an off-roading fan, choosing the appropriate pump is a minor but relevant act. It can bring about quite a difference in good electric cycle riding.

With EMotorad bringing a whole range of powerful pumps, you do not have to worry about scouring the internet to find one that will suit your requirements. 

So, do not allow under-inflated tyres to puncture your spirits of adventure. 

The right pump means that you are always ready and enjoying yourself on the go. 

The road beckons – let’s keep you and your electric cycle refuelled for the next adventure!